MXL XL L Profile Timing Belts
Good push belt systems had been very first produced by using a trapezoidal profile, these belts are MXL, XL and L. MXL timing belts are made of Polyurethane, reinforced with possibly Polyester or Kevlar twine or Nylon lined Neoprene, Fiberglass reinforced. 5 conventional widths can be obtained and when essential other widths could be Reduce to order.
widths: 1/4", 5/16", 3/8", and 1/2". As all our belts, inch timing belts can be cut to non-standard widths to meet your exact needsWhen a standard product won't meet your requirements we can provide alternative solutions through custom design and manufacturing. Our engineering and manufacturing teams will partner with you throughout the entire process.By providing design, development, manufacturing, assembly and testing in one location we can ensure the end product will meet your expectations. We specialize in both small to large production runs.
T Profile Timing Belt
T single-sided and double-sided timing belts are available in pitches 2.5, 5 and 10 mm. Made of polyurethane/rubber and reinforced with strong fiberglass tensile cords they are oil and ozone resistant. Fiberglass tensile cords provide many advantages including, high strength, low elongation, absence of creep and excellent dimensional stability. For a lightweight drive system pair these polyurethane timing belts with either aluminum pulleys or plastic pulleys.
Timing belts for HTD and RPP Profile
HTD and RPP Profile Timing Belts can be necessary for multiple reasons, such as for drives that require a constant speed transfer or for those drives that are required to be as maintenance-free as possible.
They can also be applied for multiple purposes, such as for high precision milling and grinding machines, office machines, household machines，The following product characteristics are expected: long service life, maintenance-free, high level of power transmission and antistatic behaviour in accordance, non-sensitive to external influences such as temperature fluctuations and moisture.
The special tooth form and the use of particularly resistant materials ensure YONGHANG TIMING BELTS these drive requirements without compromis.
Pu Timing belts - endless cast, with cleats and coatings
YONGHANG ALPHA linear and ALPHA V timing belts in the FDA blue version are produced from a PU base material with FDA approval for the direct transport of foodstuffs, and thus expand the wide range of YONGHANG polyurethane timing belts.
The blue timing belt has a hardness of 85 Shore A and is optionally equipped with an aramid or stainless steel tension cord. Profiles T5 and T10 with aramid cord are available from stock. The other profiles listed on the left are manufactured on request.
The thermoplastic polyurethane is eminently suitable for welding on the cleats made of FDA-approved base material. Base material, with a hardness and colours options to match those of the base belt.
In addition, the timing belts YONGHANG ALPHA V timing belt can be provided with top surface coatings, which are also made of FDA-approved base material.
About the timing belt installation
In the course of the belt set up approach, it is very important the belt be absolutely seated while in the pulley grooves prior to making use of final stress. Serpentine drives with various pulleys and drives with huge pulleys are significantly at risk of belt tensioning complications resulting from your belt tooth remaining only partly engaged within the pulleys through set up. As a way to avert these complications, the belt set up tension ought to be evenly distributed to all belt spans by rotating the program by hand. Immediately after confirming that belt enamel are thoroughly engaged in the pulley grooves, belt tension should be rechecked and confirmed. Failure To achieve this may perhaps result in an under tensioned condition Using the possible for belt ratcheting.
The FHT (Fenner Higher Torque) curvilinear timing belt method provides sleek Procedure and substantial torque carrying capability with reduced backlash. These mini-pitch synchronous timing belts and pulleys can be found in the next pitches: 1 mm, two mm and 3 mm. The miniature pitch was developed in reaction on the developing require for smaller belt drives in the present marketplace place. Exact positioning, quiet Procedure and reduced vibration, the mini-pitch travel technique offers decades of difficulties-totally free company For most applications, which include 3D Printers, Pan and Tilt functions, Clinical Gadgets and Vending Devices.
The trapezoidal condition timing belt was superseded by a curvilinear tooth profile. On account of their superior load carrying capabilities, the curvilinear belts are promoted underneath the name of YONGHANG HTD drives. That is an abbreviation of Superior Torque Drives.